Aqua Single-Lever

A diverter is the control that redirects water between two outlets — typically from a bath spout up to the overhead shower. A wall mixer with a diverter combines hot/cold mixing and outlet switching in a single unit, which is why it is the most common bathroom fitting in Indian homes. A three-way diverter adds a third outlet, usually a hand shower.

Yes, in hard water. Matte black and gunmetal finishes show limescale and soap residue more readily than chrome, and need wiping dry after use to stay looking new. Chrome plating is the most forgiving finish and the easiest to live with in Telangana and Andhra Pradesh water conditions. Choose matte black for the look, with that maintenance in mind.

Overhead rain showers rely on flow rather than force, so they need adequate head — generally a tank at least 15 to 20 feet above the outlet — to spray properly. Below that, fit a pressure pump or choose a concentrated-spray shower head instead. Tell us your tank height and we will recommend a shower rated for it rather than one that will disappoint.

Brass is corrosion-resistant, holds thread accurately and accepts chrome plating cleanly, which is why premium faucets are forged from it. Zinc-alloy bodies cost less but corrode and pit from the inside in hard water, and the plating fails with them. A brass faucet is noticeably heavier in the hand — that weight is the simplest quality check you can perform in a showroom.

A standard Indian bathroom typically needs five pieces: a basin mixer or pillar cock, a wall mixer with diverter, an overhead shower with arm, a health faucet, and an angle valve or two. Add a bath filler if you have a tub. Bring your bathroom layout to any Bandhan showroom and our consultants will build the complete fitting list in one sitting.